Avanti mo629t User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

> Auto Weight Defrost

Example: Set the oven to AUTO WEIGHT DEFROST eOOIbs shrimp.

1. Touch AUTO WEIGHT DEFROST pad 3 times “d3"

2. Touch numeral pads 6 0 0.

3. Touch START pad.

Note 1: See page 13 for Maximum Weight and Category program

Note 2: The oven will beep twice during the weight defrost program. This will take place at

approximately on third and two thirds into the program. Foods should be attended at this

time. Rearrange, shield, turn over or remove any pieces that may be defrosting more quickly

than others.

Program Cooking

The oven has the ability to be programmed to de several consecutive functions that are given

in the SPECIFICATION TABLE, and either the complete program or part of it can be used.

Remember

Always touch the “CANCEL" pad before programming.

Time Cooking Program

1.

Touch CANCEL pad.

2.

Repeat the TIME DEFROST instructions.

3.

Repeat the TIME and POWER LEVEL instructions.

4.

Touch MEMORY pad.

5.

Repeat the TIME and POWER LEVEL instructions again.

6.

Touch start pad.

Remember: TIME DEFROST and AUTO WEIGHT DEFROST can only be selected before the

cooking stage in a program. It can not be selected between or after stage 1 or stage 2.

Child Proof Lock

To set the CHILD PROOF LOCK

1. Touch CANCEL pad

2. Touch pads 5 and 7 at the same time.

A beep will sound and the child proof indicator will light. You can not operate the oven

while the CHILD PROOF LOCK is set.

To release the CHILD PROOF LOCK

1. Touch pads 5 and 7 at the same time.

A beep will sound and the child proof indicator will go out.

NOTE: Remember the oven can not be operated when the CHILD PROOF LOCK is set. If

the oven will not operate, before calling for service check to see if the CHILD PROOF LOCK

indicator is tit on the display.

Minute Timer

1. Touch TIMER pad

2. Touch numeral-pads to set the desired items.

3. Touch POWER LEVEL pad

4. Touch numeral pad 0

5. Touch START pad

15

Advertising