Detaching and attaching the front panel – Aiwa ICT-X40B User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

DETACHING AND

ATTACHING THE FRONT

PANEL

1

2

■ J

nm J

+

\

0"F^ ri0E)

3 i

^—^

©\

/ f J t

2 a D J 4 C D S • o " ' ' - - --------------

Attaching the front panel

You can detach the front panel from the unit and

carry it with you when you leave your car
unattended.

When you carry the front panel out of your car,

use the supplied carring case.
Before defaching the front panel, remove the

cassette to prevent possible damage to the unit.

1

Press PWR to turn the unit off.

2

White supporting the front panei with

one hand, press l to release one side
of the panei. Care must be taken not to

drop the panel. It may suddenly eject at

this point.

3

When the front panel is lifted from the

unit, remove it by puliing it away from

the unit.

Security Lamp

When the front panel is detached, you can find an

LED lamp on the front side of the unit. This lamp

is designed to deter theft, and continues to flash
when the car's ignition is turned off with the front
panel detached. This unit is not equipped with
any other security systems such as a security
alarm, so there are limitations to its effectiveness.

II

0

t

a ®

Ac

S

______-----------------

DD

“ J

LED lamp

Do NOT touch the connector on the reverse

side of the front panel, as doing so may
contaminate the connector and cause a poor

connection resulting in a malfunction.

ENGLISH

4

Advertising