I»' 0 q – Buffalo Technology WLAR-L11G-L User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
/it t^^ /f€‘atr
Page 3
Setting Up a WLAR-L11G-L with a Mac and AirPort Card
using OSX.x
1) Using the supplied ethernet cable, plug the ethernet output from your
CATV/DSL modem to the WAN input of the Buffalo WI_AR-L11/G-L. (Picture 1)
Reference your CATV/DSL modem instructions to determine the
correct ethernet port.
2) Using the Buffalo AC
Adapter connect the
Adapter to a 120V AC
supply and to the DC
In. (Picture 1)
Picture 1
lOBaseT/
100BaseT
WAN Port
(Connect to
your CATV/DSL
modem with
Buffalo Ethernet
cable)
3) Select “Apple” (top left-hand corner).
Select “System Preferences”.
Select “Network”. (Picture 2)
INIT Button
(Resets the
AirStation
to Default
settings)
DC In
(Plug Buffalo
AC Adapter in
here)
Internet & Network
i»'
0 Q
Internet
Network
QuickTime
Picture 2
Sharing
4) Verify “Automatic” Is selected, (beside "Locations"). (Picture 3)
Verify “AIrPort” is selected, (beside "Configure"
or "Show”, depending upon OSX revision).
Location:
Automatic
Picture 3
Show:
AirPort