AEG 33620 DK-M User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Installation
Fit the hob in the cut out and push it down until it comes in contact with the kitchen
top surface. Then remove the excess sealing.
To remove the hob from the cut-out, lift the edge of the hob by means of the edge of
a screw-driver.
If several 30cm hob are to be installed side by side into the same cut out, an assembly kit
including a support side bracket and supplementary sealings is available at our After Sales
Centres. The relevant installation instructions are supplied within the kit package.
Building over a kitchen unit with door
10
Advertising