Bolens 191-658 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
18. Attach clutch rod to clutch extension in the second hole from the front and secure with cotter hair
pin. See Fig. 2.
19. Insert hook end of stack control rod into eye bolt on auger. Attach clip to arm over control rod
which is part of L.H. mounting plate with pin and cotter pin provided. See Fig.
20. Attach stack to blower and attach stack control cable assembly to stack. Attach one loop of the
cable over the stud on the stack.
(FIG. 6)
Advertising
This manual is related to the following products: