Troubleshooting guide – Avanti CF102Y User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

PROBLEMS WITH YOUR FREEZER^

You can solve many common freezer problems easily, saving you the cost of a possible
service call.Try the suggestions below to see if you can solve the problem before calling
the servicer.

TROUBLESHOOTING GUIDE

PROBLEM

POSSIBLE CAUSE

Freezer does not operate.

Not plugged in.

The circuit breaker tripped or blown fuse.
The freezer temperature control is set at “O/OFF”.

Compressor turns on and off frequently.

The room temperature is hotter than normal.
A large amount of food has been added to the
freezer.
The door is opened too often.

The door is not closed completely.
The temperature control is not set correctly.

The door gasket does not seal properly.
The freezer does not have the correct
clearances.

The freezer has recently been disconnected for a

period of time. Four hours are required for the
freezer to cool down completely.

Temperature inside the freezer is too warm.

1

Temperature control is set too warm. Turn the
control to a cooler setting and allow several hours
for the temperature to stabilize.
Door is kept open too long or is opened too
frequentlly. Warm air enters the freezer every
time the door is opened. Open the door less
often.

The door is not closed completely.

The door gasket does not seal properly.
A large amount of warm or hot food might have
been stored recently. Walt until the freezer has
had a chance to reach its selected temperature.
The freezer has recently been disconnected for a
period of time. Four hotrs are required for the

freezer to cool down completely.

Temperature inside the freezer is too cold.

Temperature control is set too cold. Turn the
control to a warmer setting and allow several
hours for the temperature to stabilize.
Fast Freeze switch is turned on. This causes
continuous running of the compressor and

bypasses the temperature control.

Temperature of external freezer surface is warm.

The exterior freezer walls can be as much as

30°F warmer than room temperature. This is

normal while the compressor works to transfer

heat from inside the freezer cabinet.

Louder sound levels whenever freezer is on.

Modern freezers have increased storage capacity

and more even temperatures. They require high
efficiency compressors. When the surrounding

noise level is low, you might hear the compressor

running while it cools the interior.

Louder sound levels when compressor comes

on.

Freezer operates at higher pressures during the
start of the ON cycle. This is normal. Sound will
level off or disappear as freezer continues to run..

1 1

Advertising