Backup function, Setting the clock – Aiwa FR-A308U User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

BACKUP FUNCTION

English

If the AC power supply is interrupted, the clock display goes

off and the alarm setting is canceled. To back up the clock and
alarm, insert a 6F22 battery in the battery compartment on the
rear of the unit. ^ O

• The backup battery is not for radio reception.

Note

The backup function lasts about 10 minutes. Set the clock

again if 10 minutes passed after a power interruption.

Replacing the battery

Replace the battery with new one if the clock display flashes or

the alarm timer does not work properly when you connect the

AC power cord again.

Note on battery

• When you are not going to use the unit for a long period of time,

remove the battery to prevent possible electrolyte leakage.

• To prevent the risk of electrolyte leakage or explosions,

never recharge the battery, apply heat to it, or take it apart.

SETTING THE CLOCK ^ ®

1 Connect the AC power cord to a wall outlet

((D).

The clock display begins flashing.

2 While holding down CLOCK, press UP or DOWN to set

the clock.

Using the UP button changes the time faster.
12:00 midnight
12:00. noon

The clock starts running at “00” seconds.

To display the seconds,

press SNOOZE.

The seconds are displayed while the button is pressed. ^ ©
(fe) The 1st digit of the minute
(D Seconds

Advertising