Chicago Electric 20 Gallon Parts Washer With Wheels 98332 - Manual (Page 11)

SKU 98332 For technical questions, please call 1-800-444-3353. Page 11
aFter use, 2. clean external surfaces
of the tool with clean cloth.
3. WarninG! if the supply cord of
this power tool is damaged, it must
be replaced only by a qualified
service technician.
replacing the cleaning solvent
When the solvent has become dirty, it 1.
will not clean effectively and must be
replaced.
To drain solvent, place a sturdy con-
2.
tainer that is large enough to contain
at least 20 gallons of solvent under
the Drain Plug (11).
Be aware that when the Drain Plug
3.
(11) is removed some solvent will be
splashed and spilled. Prepare the
area to contain spilled solvent.
Remove the Drain Plug (11) by turn-
4.
ing it counterclockwise.
Solvent will pour out of the Body (7)
5.
into the container.
When the solvent is all drained,
6.
replace the Drain Plug (11) and wipe
out the Parts Washer with a clean dry
rag.
Dispose of the cleaning solvent prop-
7.
erly. Check with your local authority
for proper disposal method.
cleaning Parts Washer
components
The Flexible Pipe (24), Pump Hous- 1.
ing Cover (15), Screen (17) and other
components may occasional need to
be cleaned.
After draining the Parts Washer of 2.
solvent, remove these parts and blow
clean with dry compressed air.
Wipe the components clean and rein-
3.
stall before refilling the Parts Washer
with clean solvent.