G. before operation, When driving, When car washing – Audiovox MVDV4A User Manual

Page 9: When parked, Placement, Condensation, Cleaning, H. precautions for disc handling disc, Cleaning disc

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

G. BEFORE OPERATION

WHEN DRIVING

Keep the volume level low enough to be

aware of road and traffic conditions.

WHEN CAR WASHING

Do not expose the product to water or

excessive moisture. This could cause

electrical shorts, fire or other damage.

WHEN PARKED

Parking in direct sunlight can produce very

high temperatures inside your vehicle.

Give the interior a chance to cool down

before starting playback.

PLACEMENT

Put the unit where ventilation is good

enough to prevent overheating.

Never put the unit in direct sunlight or near

heat sources.

Put the unit horizontally, never put any

heavy object on the unit.

** To protect the laser, do not put the unit

where there is most dust. If there is dust

on the laser, use a cleaning disc to dean it.

Refer to the operation instructions of

the cleaning disc you bought.

CONDENSATION

Water will appear on the pickup lens in

the following cases:

The unit is suddenly moved a cold place to

a warm place.

** The unit is put in a room with a heater, or

in the cold air from a air-conditioner.

Use of the unit in a humid place. In these

cases, the unit can not work. Unload the
disc and leave the unit on for about
one hour to evaporate the water.

CLEANING

•i* Use soft cloth with a little neutral

detergent to wipe the cabinet, panel and
controls. Never use abrasive paper,

polishing powder or solvent like alcohol

and gasoline.

H. PRECAUTIONS FOR DISC

HANDLING DISC

To keep the disc clean, do not touch

the play sides of the disc.

^ Do not attach paper or tape to the disc.

Keep the disc away from direct sunlight

or heat sources.

Store the disc in a disc case after

playback.

CLEANING DISC

Before playback, wipe the disc outwards

from the center with clean cloth.

•6

Do not use any type of solvent such as

thinner, benzine, commercially available

cleaners or antistatic spray.

7

®§

Advertising