Ask Proxima DP2800 User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
cjsing the Desktop Projector
SETTINGS
This function allocsrs you to retrieve the factory-set or stored
settings for the current emry displayed in the SOURCE field. Use
the Up or Down arrow key to cycle through the options.
* FACTORY - RecaJls the dcfauii factor)*—configured values.
These will be used until you define new settings.
* STORED - Recalls your last saved settings for the current
video source,
* CURRENT — indicates that changes have been made, are in
use, and have not yet been saved.
Factory Defaults
The first time you turn the Desktop Projector on, factory-set
operating values are used. These default settings remain the same
over the life of the system. If you change any of these settings, you
can recall the factory defaults by accessing the SETTINGS
funedon and choosing FAGFORY.
3-1
a
•
User's
Guide