Aquatic AI12AIR7240 - Manual

Ar-Q^A T
serenity studio
12
serenity studio
model # AI12AIR7240 / AI12AIR7240TO (Tub Only)
39 3/4"
specifications
:
Note: Serenity tub only models feature a
Rre-leveled ABS Support Base.
Bongh-ln Plumbing
Measurements
12 1/8"
4 3/4"
general specifications :
Tub Size
Bathing Well
Shipping Weight
Tub Weight Filled
Tub Only Weight
71 3/4" x 39 3/4" x 23 3/4"
182 cm x 101 cm x 60 cm
43" long
22 1/2" wide
21" interior depth
195 lbs. / 88 kg
742 lbs. / 337 kg
134 lbs. / 61 kg
Gallons to Overflow 76 gal. / 288 L
electrical specifications :
Blower/Heater 1 HP; 10.5 AMP; 120V
Requirement 15 AMP; 120V, separate circuit
required protected w/ Class A GFCI
standard equipment :
Air Bath System:
- 60 Air Jets
- 1 HP Variable Speed Air Blower with 20-Minute Timer
- 600 Watt Air Heating System
- Electronic Control Package with Wave and Pulse Features
- Automatic Purge and Dry Cycle with Water Sensors
Aquatic Quality Features:
- Chromatherapy
- Slip Resistant Floor
- Air Channels Lined with Antimicrobial Coating
- Extra Deep and Long Bathing Well
- Pre-leveled ABS Support Base
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IARMO Listed, Factory Tested
Limited Lifetime Warranty
optional equipment :
• Comfort Pillow - Oval or Rectangle
• Lift & Turn Waste and Overflow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, or Oil Rubbed Bronze
• Cable Drive Waste and Overflow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit Only)
• Waterproof Remote Control with infrared sensor
and 25'cord
• Optional Blower Location
• Remote Blower Wiring Kit
• Premium Colors
All acrylic colors featured by Aquatic match the
industry's leading fixture manufacturers.
Fax-On-Demand
Document #1191
Each Serenity Air Bath model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air tem­
perature will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air
coming from the air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.
The manufacturer accepts a
1/4”
variance. There are variations on each tub and specifications are subject to change as we improve upon
our
product as required. The dimensions needed for site preparation
and structure buiiding shouid be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work. www.aquaticwhirlpools.com 800.555.5324
March 2008
81