Bogen CAM - Manual (Page 4)

AUX out
Figure 7 — Cascade-connected outputs
Output
Output
Figure 8 •— Paralleled microphone outputs
CONTROL OPERATION
POWER
This switch applies power to the unit. The POWER indicator
lamp will light to indicate power on when connected to an AC
power source.
MASTER
This control regulates the overall volume of the preamplifier,
which may include the mixed output of two or more input
channels. To set this control, rotate it clockwise to the
maximum position, then .set the individual MIC and AUX
controls to the highest anticipated level of use. Re-adjust the
MASTER control to the desired listening level for the mixed
output.
MIC VOLUME
The four MIC volume controls are used to adjust the level of
individual microphone input channels. Rotate these controls
clockwise (to the higher numbers) to increase volume and
counter-clockwise to reduce volume.
AUX VOLUME
Controls the AUX input volume and functions the same as
the MIC volume controls.
ACCESSORIES
RPK35B RACK PANEL
Bogen Model RFK35B Rack Panel is designed to mount the
CAM in a standard 19-inch sound equipment rack. The panel is
fabricated from cold-rolled steel and finished in black enamel.
WMK-1 IN-WALL MOUNTING KIT
Bogen Model WMK-1 is designed to mount the Mixer-
Preamplifier flush in a wall. Depth of the mounted unit is 3'/^
inches.
MAINTENANCE
Caution
There are no user-replaceable parrs within the
unit. A a internal servicing should he performed
by qualified service personnel.
BOGEN SERVICE
We are interested in the maintenance of your Bogen equip­
ment. If trouble develops, do not hesitate to ask our advice.
Information can be obtained by writing to: Service Deptartment,
Bogen Communications, Inc., 50 Spring Street, Ramsey, NJ
07446. .
When communicating with us, give the model and series
designation of the unit. Describe the difficulty and include details
on the electrical connections to associated equipment. We will
send you service information if the trouble appears to be minor.
If the trouble requires servicing, you can ship the unit to the
Bogen factory for service.
If you ship the unit, pack it well, preferably in the original
shipping container. Send the unit fully insured and prepaid by
UPS or other responsible carrier. It will be promptly repaired and
returned to you.
C O M M U N I C A T t O N S , I N C
50 SPRING STREET. P.O. Boi 575
RAMSEY NJ 07446 (2011934-8500