BBE 362 - Manual (Page 12)

SPECIFICATIONS
Frequency Response
Bypass............................................................................. DC to 20kHz
Process............................................................................ program controlled
Absolute Noise in Process Mode....................................... -90dfiubelowratedmaxoutput
of OdBu
Total Harmonic Distortion in Process Mode.................... less than 0.1 %@*10dBu level
Input Characteristics
Input Impedance............................................................... 50K Ohms
Nominal Input Level........................................................ -lOdBu
Output Characteristics........................................................ +16dBu
Minimum Load Impedance for full output level............ IK Ohm
Nominal Output Level.................................................... -lOdBu
Maximum Ouqjut Level................................................. + 16dBu
Power Requirements
U.S. Model..................................... 100-120Vac,50/60Hz, 10 Watts
Standaid Model.............................. 200-240Vac, 50/60Hz, 10 Watts
AC Line fuse protected..................... U.S. Model; 250Vac/ViA Fastblow type fuse
StandardModel: 250Vac/. 125 AFastblow type fuse
Terminations/Connectors-rearpancl V4" Phone jacks
Dimensions....................................... Standard lU single rack
l ^ " H x l 9 " W x 5 % " D
Weight............................................ . 4'A lbs. (2.5Kgs)
Note; OdBu = 0.775 Vims
Note: Due to continuing product improvement, specifications and design are subject to change withoitf notice.
Service
We recommend that if at all possible, a BBE 362 which requires service be sent to our facility in Huntington Beach, California. We
request that a "RETURN AUTHORIZATION" be issued by the dealer from whom you purchased the unit. If this is not possible, call
BBE Sound, Inc. directly (714) 897-6766, to obtain a "RETURN AUTHORIZATION", include a copy of the bill of sale with the unit
when it is shipped to BBE Sound, Inc. so that the service can be expedited.
As the repair turnaround time is minimal, we request that the unit be sent to BBE Sound, Inc. We also need to add reliability data
to our files so that future revision may be undertaken, if necessary, to improve the product.
Warranty
Warranty registration of the unit to BBE Sound, Inc. is not necessary. It is strongly recommended that you retain a copy of the bill of
sale for future reference.
IT IS THE SOLE RESPONSIBILITY OF THE END USER TO PROVIDE THE BILL OF SALE OR OTHER MEANS OF
PROOF OF PURCHASE TO VALIDATE THE WARRANTY IF WARRANTY SERVICE IS REQUESTED.
The BBE 362 is warranted against defects in material and workmanship for a period of five (5) years from date of purchase from BBE
Sound Inc. or from an authorized dealer. During this period, we will repair units free of charge providing that they are shipped prepaid to
BBE Sound, Inc. 5381 Production Drive, Huntington Beach, CA 92649. We will pay return UPS shipping charges within the USA. All
charges related to non-UPS shipping, including customs clearance, will be billed. The warranty will be honored for the longer of either 90
days from the date of any service or the remainder of the original 5 Year factory warranty.
This warranty will be consider null and void by BBE Sound, Inc. if any of the following is found:
1. The equipment has been physically damaged.
2. The equipment shows signs of abuse.
3. The equipment has been electrically damaged by improper connection or attempted repair by the customer or a third party.
4. The equipment has been modified without authorization.
5. The bill of sales indicates that the purchase date of the equipment is not within the warranty period.
All non-warranty repairs are warranted for a period of 90 days from the date of service.
BBE Sound, Inc. is NOT LIABLE FOR CONSEQUENTIAL DAMAGES. Should the unit fail to operate for any reason, our sole obligation
is to repair it as described above.
DO NOT RETURN ANY PRODUCT TO THE ABOVE ADDRESS WITHOUT INSTRUCTIONS AND AUTHORIZATION ISSUED BY
THE ABOVE LOCATION.
Maintenance
Maintenance of the BBE 362 is limited to proper cleaning of the unit with mild household cleaner such as Formula 409™ or Windex™,
The chassis and cover are steel finished with a durable polyurethane paint, while the front panel is an anodized aluminum extrusion.
There are no user replaceable parts and the unit should not be opened for any reason unless you are a qualified technician. Calibration
should be performed if parts are replaced or if a performance check-out indicates a problem with calibration. Long term use has shown
that over the life of this unit there is little or no drift of the components in the BBE 362 which would cause a change in calibration. A
very conservative design philosophy has resulted in a piece of equipment which runs very cool and should give years of trouble-free
10