A: assembly instruction of pec dec attachment, B: cable assembly of pec dec attachment – BodyCraft Pec Dec Attachment F412 User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A: ASSEMBLY INSTRUCTION OF PEC DEC ATTACHMENT
1. Attach Pec Dec Support(201) and Pec Dec Pulley Fiame(202) to Front Upright(101) using two Bolts(221),
foir V\6shers(226) and two Nuts(228).
2. Insert foir 3/4" Metal Bushing(213) into Pec Dec Support(201). Insert Right Pec Dec Amn(204) through the
hole on Pec Dec Support(201),lighten Bolt(228) and V\teher(225) arxl track off approximately 1/2 turn so
that arm moves freely. Repeat the same process to Left Pec Dec /\rm(203).
3. Attach End Cap(211) onto the Pec Dec Support(201) and both Pec Dec A
itt
X204).
4. V\fet the Foam Pad(215) arxl slide onto both Pec Dec Arm(203,204).
5. Attach Back Pad(216) on Front Upr1ght(102), using two Bolte(221) arxl V\fcishers(226).
201
211 A -224
,228
B: CABLE ASSEMBLY OF PEC DEC ATTACHMENT
Assemble cables and pulleys sirrxiltaneously.
1. Unhook the terminal erxl of Low Cable{137) arxl hook on the single Pulley Bracket(205). As showi Fig C
2. Insert the Pec Dec Cable{217) through the Single Pulley Bracket(205), over the pulley on Pec Dec PJley
Frame(202) and attach steel ball end on cam of both Pec Dec /Vs shown Rg B.
B
203 or 204
C (^214
D
^214
229«k_
1
1
222
Thank you for purchasing the Bodycraft Smith Attachment
Strength Training System. If You have any questions,
please call your local BodyCraft dealer or call our
customer service department at 800-990-5556.