Description, Specifications – Altec Lansing 1715C User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Description

The 1707C and 1715C Mixer/Power Amplifiers offer a will be muted,

highly flexible integration of a user configurable six input

mixer with a fully protected power amplifier in one con­
venient cost effective package.

The six input ports accept any of the several input

modules

or

output

module.

The

programmable

input

modules may have their muting circuitry configured in
either "priority", "slave" mode, or may be set to ignore
muting commands. When a module configured in the

"Priority" mode is activated, modules in the "slave" mode

Circuitry is also provided to allow remote volume

control of individual inputs.

Multiple

mainframes

may

be

dynamically

linked

together. Separate preamp-out and amplifier-in jacks allow

the insertion of equalizers or other signal processing
between the mixer and the p)ower amplifier.

A multi-tone generator eind a compressor/limiter are

also provided.

Continuous

Average Power

1707C
1715C

Maximum Midband

Output Power

1707C

1715C

Power Bandwidth:

Direct Output:

Transformer Output:

Frequency Response:

Direct Output:

Specifications

Input Sensitivity / Input Impedance:

75 watts
150 watts

(Reference 1 kHz at 1% THD)

100 watts
175 watts

(Ref. 1 kHz at rated output

power)

better than 20 Hz — 20 kHz
better than 50 Hz — 15 kHz

Transformer Output:

Link Output:

Preamp Output:

±1 dB, 20 Hz - 20 kHz

(Ref. 1 kHz, I watt output)

±1.5 dB, 50 Hz - 15 kHz

(Ref. 1 kHz, 1 watt output)

±ldB, 20 Hz - 20 kHz

(Ref. 1 kHz, 100 mVrms,

10 kil load)

±ldB, 20 Hz - 20 kHz

(Ref. 1 kHz, 0 dBm output,
600 n) load)

Total Harmonic Distortion (THD):

Direct Output:

<0.05%, 20 Hz - 20 kHz

(Ref. 1 kHz, rated output
p>ower, 30 kHz low-p>iiss filter)

Transformer Output:

<1.0%, 50 - 100 Hz

<0.1%, 100 Hz - 20 kHz

(Ref. 1 kHz, rated output

jxjwer, 30 kHz low-pass filter)

link Output:

<0.05%, 20 Hz - 20 kHz

(Ref. 1 kHz, 100 mVrms

output, 10 kil load, 30 kHz
low-pass filter)

Preamp Output:

<0.05%, 20 Hz - 20 kHz

(Ref. 1 kHz, 0 dBm output,

600 fl load, EQ flat,
compressor/limiter off,
30 kHz low-p>ass filter)

Intermodulation Distortion:

(SMPTE 4:1)

Direct Output:

less than 0.1% at rated
power)

Input Sensitivity / Input Impedance:
(For rated output power. Ref. 1 kHz, 0 dBu = 0.775 Vrms)

Using

1780A/1780AT:

(balanced, no pad)

Using

1780A/1780AT:

(balanced, w/pad)

Using

1781A:

(balanced)

Using

178 lAT:

(balanced)

Using

1781A-H785A:

(balanced)

0.3 to 100 mVrms / 10 kil
(-68 dBu to -18 dBu)
3 mVrms to 1 Vrms / 10 kil

(-48 dBu to -f-2 dBu)
0.3 to 100 mVrms / 10 kil

(-68 dBu to -18 dBu)
0.1 to 30 mVrms / 600 il

(-78 dBu to -28 dBu)
0.1 to 30 mVrms / 600 il

(-78 dBu to -28 dBu)

Link Input:

(unbalanced)

Amplifier Input:

(unbalanced)

Rated Output Level /

Minimum Load

Impedance:

Link Output (unbal):

Preamp Output (unbal):

Auxiliary Output (unbal):

Direct Output:

1707C:
1715C:

Transformer Output:

1707C:

1715C:

Damping Factor:

Direct Output:

Signal-to-Noise Ratio:

Direct Output:

(master at minimum)

Direct Output:

(master at maximum)

Link Output:

Preamp Output:

Protection Systems:

Amplifier:

Load:

External DC Supply:

Mainframe:

Equalization:

Bass:

Treble:

100 mVrms / 10 kil

(-18 dBu)

0.775 Vrms / 10 kil
(0 dBu)
(Reference 1 kHz)

100 mVrms (-18 dBu), 2 kil

0 dBm, 600 il min. load
0 dBm, 600 il min. load

Unbalanced
24.5 Vrms / 8 il min. load
24.5 Vrms / 4 il min. load

Balanced
17.4 Vrms / 4.0 il min load

25.0 Vrms / 8.3 il min load
70.7 Vrms / 66.6il min load
25.0 Vrms / 4.2 il min load
34.6 Vrms / 8.0 il min load
70.7 Vrms / 33.3il min load

>40, 20 Hz - 1 kHz

> 105 dB below rated

output power, A weighted.

>80 dB below rated output

power, A weighted.

>75 dB below 100 mVrms

output, A weighted.

>75 dB below 0.775 Vrms

output, A weighted,

EQ defeated, compressor /
limiter off.

• Short circuit current

limiting.

• Over voltage limiting.
• Thermal Sensing.
• Spurious oscillatory

protection.

• Low AC line sensing.
• Output DC detection.
• Subsonic detection.
• Tum-on/tum-off

transients.
(approx 3 seconds)

• DC input fuses.
• AC line fuse.

Shelving Type.

±12 dB at 100 Hz.
±12 dB at 10 kHz.

Note: 0 dBm into 600 il yields 0.775 Vrms.

Advertising
This manual is related to the following products: