Guarantee for uk sales, Claims under this guarantee, Enquiries – Arcam Delta 150 NICAM User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Delta 150 NICAM stereo TV tuner handbook

Guarantee for UK sales

This equipment has been fully tested and a full record of

these tests made before despatch from the factory. Both the
workmanship and the performance of this equipment are (except as set
out below) guaranteed against defects for a period of two years from
the date of purchase, provided that it was originally purchased from an
authorised UK dealer under a consumer sale agreement. (The words

'consumer sale' shall be construed in accordance with Section 15 of the
Supply Of Goods (Implied Terms) Act 1973.)

The manufacturers can accept no responsibility for defects

arising from accident, misuse, abuse, wear and tear, neglect or through

unauthorised adjustment and/or repair, neither can they accept
responsibility for damage or loss occurring during transit to or from the
person claiming under this guarantee.

This guarantee covers both labour and parts, and is

transferable to subsequent purchasers, but the liability of the
manufacturers is limited to the cost of repair or replacement of the
defective parts (at the discretion of the manufacturers) and under no
circumstances extends to consequential loss or damage.

Claims under this guarantee
This equipment should be packed in the original packing and

returned to the dealer from whom it was purchased or, failing this, to any
other authorised Arcam dealer. If it is not possible to return the
equipment by hand, then it should be sent carriage prepaid by a

reputable carrier

If the original packing is not available, replacement packing

can be purchased from the manufacturers. The equipment should not be
sent by post.

Do

NOT CONSIGN THE EQUIPMENT TO A

r

CAM UNLESS YOU HAVE BEEN

SPECIFICALLY REQUESTED TO DO SO BY THE MANUFACTURER'S TECHNICAL SALES OR

SERVICE DEPARTMENTS. DO NOT UNDER ANY CIRCUMSTANCES ATTEMPT TO

DISASSEMBLE THE EQUIPMENT BEFORE DESPATCH.

If you have any difficulty complying with these requirements,

please contact the manufacturers at the following address:

ARCAM (A & R Cambridge Limited)

Pembroke Avenue,
Denny Industrial Centre,
Waterbeach,
Cambridge, CBS 9PB, England.

Telephone (0223) 861550 and (0223) 440964

Fax(0223)863384

In either case you should state clearly your name and

address, the date and place of purchase together with a brief description
of the fault. In the event of equipment being returned which, after

having been tested, is found to comply with the published specification,
the manufacturers reserve the right to charge a reasonable fee for
testing the equipment, and for the return carriage.

Enquiries
The manufacturers are happy to answer any queries you may

have regarding the use of this equipment on the condition that this
enquiry is by letter and a stamped addressed envelope is provided. You
should state clearly the serial number of the unit, the dealer from whom

it was purchased, and the date of purchase.

T

his

guarantee

in

no

way

varies

or

removes

a

purchaser

s

STATUTORY RIGHTS.

Part No. SH034 JULY 1990 E&OE.

Designed by Carrods Design and Communications, Cambridge.

16

Advertising