Handsfree operation power switch operation, Handsfree calling, Handsfree answering – Audiovox HF505 User Manual
Page 2: Handsfree to handset switching
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HANDSFREE OPERATION
Power Switch Operation
When the ignition key is on, push the Power switch on the Handsfree
Adaptor and set it to the IN-Position to turn your handset on. Press the
switch again to set it to the OUT-Position to turn your handset off.
When the Power switch on the Handsfree Adaptor is left in the IN-Posi-
tion and the ignition key is turned on, your handset will be powered up.
When the ignition key is turned off, your handset will be powered off.
The power of your phone will also be controlled with the power switch on
your handset.
Note: Power key of your handset will not operate when your hand
set is placed in the cradle.
Handsfree Calling
1. To place a call handsfree, enter a telephone number and press <5^.
2. When the called party answers, proceed with the call as usual but leave
the handset in its cradle and use the external microphone and loud
speaker.
3. T
q
terminate your call, press (
end
).
Handsfree Answering
1. To answer a call handsfree, press any key except @), 0,0 or (
e
^.
2. Proceed with answering your call as usual but leave the handset in its
cradle and use the external microphone and the loudspeaker.
3. To terminate your call, press
(
end
).
Handsfree to Handset Switching
1. To switch over to handset operation while in handsfree mode, remove
your handset from its cradle.
2. Proceed with the conversation using your handset.
3. To terminate your call, press (|^.