Calibre UK PremierView 18ID - Manual (Page 2)

Technical Information
Panel Specification:
Viewable image size 46cm/18.1" nominal.
Panel resolution 1280x1024.
Colour depth 8 bits per colour, 24-bits total.
Viewing angles 85deg L/R/U/D typical,
Panel brightness 270cd/m
2
nominal
Panel contrast ratio 400:1 nominal
Signal compatibility:
Input 1 – computer RGB via 15HDD socket.
640x350 up to 1600x1200, 50-75Hz refresh,
non-interlaced. (Note: 1600x1200 support is via
image downscaling to fit the 1280x1024
resolution panel. There may be a slight loss of
image quality in downscale mode.)
Syncs: separate TTL/5V positive or negative,
negative combined sync TTL level, or negative
sync on green consisting of 0.3V sync and 0.7V
video.
Input 2 – composite video via BNC
PAL, NTSC or SECAM, automatic standards
detection. Pro Video model has automatic
enhanced-bandwidth monochrome mode.
Input 3 – YC/S-Video via 4-pin Mini-DIN
PAL, NTSC or SECAM, automatic standards
detection.
Input 4 – Pro Video Option Only
RGB or YUV component video via 3 or 4 BNCs.
Input 5 – Pro Video with SDI Option Only
SDI Serial Digital Video via BNC.
Input 6 – DVI Option Only
DVI Digital Visual Interface, DDC2B compatible
for connection to DVI compatible graphics cards.
Touchscreen option:
Resistive touchscreen with RS232 serial
controller available to special order.
Touchscreen has anti-glare finish, fitted in place
of anti-scratch anti-glare viewing window.
Power requirement:
12VDC at approximately 70W.
An optional mains PSU is available.
Other power options available to order include
ground isolated 12VDC, 24VDC and, 28VDC
with optional industrial or military grade power
filtering.
Model numbers:
46ELCD26 xx I zz
| | |
| | |-M3 = industrial metal case
| | |-SC = open chassis
| |
| |
| |- I = IDtech panel
|
|-01 = VGA analogue only
|-02 = VGA analogue + DVI
|-03 = VGA analogue & Std Video
|-04 = 03 + DVI
|-05 = VGA analogue & Pro Video
|-06 = 05 + DVI
|-09 = 05 + SDI Video
|-10 = 05 + DVI + SDI Video
|-11 = Standard video only
|-13 = Professional video only
|-14 = Pro Video + SDI
Size & Weight: - cased units
Outside dimensions 442mmx389mmx66mm
Approx. weight 7-7.5Kg depending on config.
Calibre UK Ltd
Cornwall House,
Cornwall Terrace,
Bradford, West Yorkshire
BD8 7JS, England
Tel +44 (0)1274 394125
Fax +44 (0)1274 730960
E-mail [email protected]
Web-site www.calibreuk.com
Issue 4.31 E&OE specifications subject to change without notice 10/12/07 All trademarks acknowledged.