Ask Proxima Ultralight LS1 - Manual (Page 5)

c
IMPORTANT SAFETY INSTRUCTIONS
>
All №« safety and oparadnd inam^cDona should be read
before the product ia operated.
Read ai of the instn>ctiond giveo here and retain them for
later use. Unplug (his proiector from AC power supply before
cleane>g. Do rtot use Squid or aerosol ciearvers. Use a damp
cloth for cleaning.
Oo rKt use attachmems not recommer>ded by the
fnaixdactuier as they may cause hazards.
Oo r>ot place this proiector on an unstable cart stand, or
table. The protector may M. causing serious infury to a cMd
or adult. ar)d sencus damage to the protector. Use only with a
cart or stand recommer>ded by the manufacturer, or sold with
the projector. WaN or shelf mounting should follow the
manufacturer's instructions, and should use a mounor>g kit
approved by the manufacturer.
Oo not expose this urvt to rain or use r>ear water... for
example, m a wet basement rvear a swimmmg pool. etc...
Slots and oper)ings m the back and bottom of the cabinet are
provtded for ventsation. to insure reliable operation of the
equipment and to protect it from overheating.
The opamr^ should r>6ver be covered with cloth or other
material, and the bottom opening should not be blocked by
placing the projector on a bed. sofa, rug, or other similar
surface. TNs protector should never be placed near or over
a radiator or neat register.
This pro^ecw should not be placed in a budt*in instaHabon
such as a bookcase unless proper ventfation is provided.
This protector should be operated only from the type of
power source indicated on the mahor>g label. If you are not
sure of the type of power suppsed. consult your authonzed
dealer or local power company.
O q not overload wall outlets and extertsion cords as this can
result in fire or eiecmc shock. Oo rtot allow anythir>g to rest on
the power cord. Oo not locate this projector where the cord
WIN be abused by persons waJidr>g on it
N e w push obiecu of eny kind into thie proi«cter through
cabinet slots as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock.
Never spiH liquid of any kind on the protector.
Oo not attemot to servM this protector yourseff as opening or
removing covers may expose you to dangerous voltage or
other
rtazards. Refer all servtcing to quabfied service
personnel.
Unplug this projector from wall outlet and refer servicing to
quakited service personnel under the fosowng conditions:
a. When the power cord or plug is damaged or frayed.
b. If Bqud has been soded into the pr^ector.
c. If the projeaor has been exposed to rain or water.
d. If the protector does not operate normally by following the
operabng instructions. Adfust only those controls that are
covered
by the operating instructions as improper
adaistmem of other controls may result in damage and wfl
often require extensive work by a quaiiSed technician to
restore the projector to normal operation.
e. tf the projector has been dropped or the cabinet has been
damaged.
f. When the projector exhMs a distinct cha/>ge in
pociormance*this indicates a need lor service.
When repiacemem pans are required, be sure the service
technician
rtas used replacement pans specified by the
manufacturer that have the same chs^actensocs as the
ohgjnal part Unauthorized substitutions may result in tire,
electric shock, or atfury to oersons.
Upon completion of any service or repairs to this protector,
ask the servKe techndan to perform routine safety checks to
determine that the projector is in safe operating condition.
This proiector is equipped with
a grounding type AC line plug.
Should yog be unable to insert
the plug into the outlet contact
your electrician. Oo not defeat
the
safety purpose of this
groundmg type plug.
GROUND
Follow al warnings and instructions marked on the
profeetors.
For added protection to the projeaor during a lightnir>g storm,
or when
It Is left unattended and unused for long periods of
time, unplug it ffom the was outlet. This wiH prevent damage
due to bghtning and oowenine surges.
An appliance and can combination
Should be moved with care. Oukk
stops,
excessive force, and
uneven surfaces n\ay cause the
appiiarKo and cart combination to
overturn.
H the projeaor is to be built into a compartment or simiiarty
enclosed, the minimum distances must be maintained.
Do not cover the ventilation slot on the projeaor.
Heat buikl*up can reduce the service life of your projeaor.
and can also be dangerous.
-.3 —