Audiovox DT 941 CI - Manual (Page 40)

BASÉ UNÎT MES3AGÉ WINDOW
(LED)
' The large Base Unit display pro vides useful data or ihs status of your DT
Э41С1 apswaring device. Below зга eJtaroplea of the data:
The Base displays: What it means;
Flashing number Ybu have lhat amount of new messages
0 You have no new messages
CU Dashing The dock needs to be set
A Answering device is in announce-only mode
F flashing Memory is tell
99 flashing ' Records ng time has exceeded ^3 seconds
1-7 Volume level, as you’re setting it
— Answering device is answering a call or in
remote mode
- Hashing Answering device is In programming mode
Froro a remote iocation, you can
access талу of the ОТ Э41С1
answering device functions, such
as listening to messages, recording
a merriQ, or changing your outgoing
message.
To access your ОТ Э41С1 ra-
mctely, you need to call from a
different phone lire, using a touch*
tone phone.
Oial ycur phone number and wait
ter the DT Э41С1 lo answer.
While the DT 94tCI is playing the
then enter
code.
your
yrng the
QD.
2'digrt security
(tl the DT 941С1 is OF^F when you
call, let the phone ring at least 10
limes. The answering device wilt
turn itself ON, and prompt you to
enter your security cade,)
The factory-set security code is
19. To program a different code.-^
see SETTING UP YOUR DT Э41 Cl
ANSWERING DEVICE - SET
SECURITY CODE.
Once the security has been
entered, you will hear a beep,
confirming that the DT 941 Cl has
entered remote operation.
You will ihen hear the voice
prompt announce the number of
new
(unplayed) messages,
folEowed by the playback of the
new messages (if any).
за
DTÏtiOlf«} U
A