Casio EX-S20U/EX-M20U - Manual (Page 47)

47
BASIC IMAGE RECORDING
IMPORTANT!
• Zoom is disabled whenever the monitor screen is
turned off (page 25).
• Using digital zoom can cause degradation of the
recorded image.
• To disable digital zoom, select “Off” for the “Digital
Zoom” setting on the “REC” tab.
NOTE
• You can use the key customization feature (page 73)
to configure the camera so the digital zoom factor
changes whenever you press [
̆ ] and [ ̄ ] while in the
REC mode.
Using the Flash
Perform the following steps to select the flash mode you
want to use.
1. In the REC mode, press [MENU].
2. Use [ ̇] and [̈] to select the “REC” tab.
3. Use [
̆] and [̄] to select “Flash”, and then
press [
̈].
4. Use [
̆] and [̄] to select the flash mode you
want, and then press [SET].
To do this:
Have the flash fire automatically
when required (Auto Flash)
Turn off the flash (Flash Off)
Always fire the flash (Flash On)
Fire a pre-flash followed by image
recording with flash, reducing the
chance of red-eye in the image (Red-
eye reduction). Have the flash fire
automatically when required.
Select this setting:
Auto