Cabletron Systems CSX1000 - Manual (Page 431)

Workgroup Remote Access Switch 431
S YSTEM M ESSAGES
System Message Summary
[AUTH] ACE Encryption configured for DES: not supported.
The ACE server is configured for DES encryption. Only SDI encryption is currently supported by
the ACE client.
[AUTH] ACE Error receiving server log message acknowledgment.
A client syntax error occurred during an authentication attempt via ACE. The server did not
respond to the logging of the message. Make sure the ACE server configuration is accurate.
[AUTH] ACE LOGIN rejected user: <user name>
The remote Authentication server rejected the named user. This indicates that one of the following
has occurred:
1. The <user name> is not in the remote Authentication server’s database.
2. The <user name> is entered incorrectly in the remote Authentication server’s database.
[AUTH] ACE Node verification received; Client initialized.
The CyberSWITCH ACE client was in an initialized state. Node verification was received from the
server and the initialization cycle is complete.
[AUTH] ACE No server configured for designated database location.
ACE is configured as a database location for security authentication. Either no ACE server has been
configured or an error occurred when parsing the ACE server configuration.
[AUTH] RADIUS CHAP rejected for device: <device name>
The remote Authentication server rejected the CHAP mode authentication request for the indicated
device. This usually indicates that one of the following has occurred:
1. The <device name> is not in the remote Authentication server’s database.
2. The device’s CHAP response was not calculated properly.
3. The device’s SECRET does not match the secret in the RADIUS server’s database.
4. The RADIUS server’s database entry for this device contains errors.
[AUTH] RADIUS HDLC BRIDGE rejected bridge address: <mac address>
The remote Authentication server rejected the bridge address. This indicates that one of the
following has occurred:
1. The <mac address> is not in the remote Authentication server’s database.
2. The <mac address> is entered incorrectly in the remote Authentication server’s database.
[AUTH] RADIUS INTERFACE LOOKUP rejected name <interface name>
The remote Authentication server route lookup feature rejected the interface name. This indicates
that one of the following has occurred:
1. The < interface name> is not in the remote Authentication server’s database.
2. The < interface name > is entered incorrectly in the remote Authentication server’s database.