Arcam ALPHA AV50 - Manual (Page 14)

Technical Specifications
Continuous power output per channel
Left + Centre + Right, 8Q, 20Hz - 20kHz SOW each
4C, 20Hz - 20kHz 75W each
Single front channel, 8fi, 1 kHz 55W
40, 1kHz 75W
Rear channels, 80,1kHz SOW each
40, 1kHz 7SW each
THD, 1kHz, 80% maximum output 0.03%
Peak current rating ±10Amps
Line Inputs (stereo mode)
Frequency response ±0.SdB, 20Hz - 20kHz
S/N ratio (CCIR)ref rated output 90dB
Input sensitivity 220mV nominal (Max input level
Input impedance 7kQ
Overload margin 17dB
Processor Inputs
Input sensitivity 220mV
Preamp Outputs
Nominal output level 700mV
Maximum output level SV
Output impedance 2S0Q
Video Section
Video signal type Universally compatible
Nominal input/output level 1VP-P, 750
Maximum input level 2V P-P
Frequency response SHz- 10MHz, -3dB
General
Operating voltage 230V ±12%, 115V ±12%
Maximum power consumption 600VA (10VA in Standby mode)
Size (overall) W/D/H mm. 430x330x100
Weight (nett) 7.7kg
(packed) 9.1kg
E&OE