Setting the clock, Radio operation, 1 press pwr to turn the unit on – Aiwa CDC-XI15 User Manual
Page 6: 2 press and hold disp for more than 2 seconds, 3 press /s. to set the hour, 4 press disp, Press pwr to turn the unit on, Note, Setting the clock radio operation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETTING THE CLOCK
RADIO OPERATION
1
Press PWR to turn the unit on.
2
Press and hold DISP for more than 2
seconds.
> X11 M I /
-on n~
"ic-b Uv
nTTTT^
3
Press /S. to set the hour.
Press 'V' to set the minutes.
4
Press DISP.
The clock starts working from 0 second.
Having the ciock displayed while the unit is
turned on
Press DISP. The clock display appears for a few
minutes, then the unit returns to its former display.
1
2
Press PWR to turn the unit on.
Press BAND to select the band from
among FM1, FM2, FM3, AMI, and AM2.
The band indication appears cyclically in
order.
FM1, FM2and FM3 share the same frequency
range.
AM1 and AM2 share the same frequency
range.
|
fm
.'OS. t ““I
i
4
Band indication Frequency indication
Press
(more
than
0.5
second)
either
TUNE
or
TUNE
V"
to
tune
in
the
desired station.
Press to increase and N/" to decrease
the frequency.
The unit starts scanning and tunes in a station
automatically (Seek tuning).
Press the button again to deactivate the
function. Repeat the procedure until the
desired station is tuned in.
Note
if you press (less than 0.5 second at a time)
eitherTUNE /X or TUNE V', the frequency
decreases or increases step by step.
Press VOL to project out the control
and turn it to + or — to adjust the
volume.
5
ENGLISH