Avanti 271YW User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
7. Insert the bottom hinge at the left side using the
two screws previously removed in step 6.
NOTE: Do not tighten screws.
8. Stand the cabinet.
9. Replace the door making sure the bottom
socket enters the bottom hinge pin. Be sure
washers are in place.
10. While holding the door in the closed position,
secure the top hinge at the left side using the
two screws previously removed at tfie
beginning in step 2. Do not tighten the screws
until the top of the door is leveled with the top
cabinet.
11. Replace the hinge cover.
12. Tools required;
-8MM & 10MM socket-ratchet
-Putty knife or thin-blade screwdriver
10
Advertising