Draper Paragon Large Electrically Operated Projection Screen User Manual

Paragon, Ecovision

Advertising
background image

Eyebolts for hoisting screen

(do not lift screen by center of case).

Case support brackets.

Knockouts for electrical connections

(two per end) with plastic plugs*

*Left hand motor location only on Paragon

1

/

2

" threaded

rod (for suspending

screen) by others.

3

/

8

" -16 threaded rod

(use for adjusting

deflection in extremely

long units) by others.

8"

13

1

/

4

"

12"

Please Mark Appropriate Selections
Select Viewing Surface:

Matt White
Glass Beaded

Optional Accessories:

Extra Screen Drop (Total screen height cannot exceed 24')

Same color as viewing surface (standard on AV format screens)
Black (standard on all other formats)

Length of total drop

Black Masking Borders (Optional on AV format, standard on all others)
Wall Mount Bracket Kit (Includes two brackets)
Endcap Ceiling Tile Flange Kit (2 per kit)
Ceiling Tile Flange for front and/or rear of case (12' lengths)

How many 12' lengths do you need?

Control Options:

Please Note: This Draper motorized screen comes with one 110V-120V AC
3-position wall switch (silver wall plate with black rocker)

Total number of 110-120V AC switches (switches operate independently)

Substitute white switch(es) for silver wall plate with black rocker
Serial or Network Communication (Complete Serial & Network Control Planning Sheet)
Optional Low Voltage Control Module (LVC-III)

24 Volt 3-Button Switch

Number of 24V switches:

Radio Frequency Remote Control (only with 24v)
Infrared Remote Control (only with 24v)

Optional Key Operated Switch

Power Supply Key Switch (On-off)
3-Position Key Control
3-Position Switch with Hinged Key-Locking Coverplate

Optional Video Interface Control

VIC-115

Override Switch

VIC-12

Override Switch

VIC-6

Override Switch

by

Large Electrically Operated Projection Screen
With Motor–In–Roller

Paragon

Copyright © 2008 Draper Inc. Form Paragon_Sub08-R

Printed in U.S.A.

PROJECT:

ARCHITECT:

CONTRACTOR:

SUPPLIER:

DATE:

REVISED:

Specifi cations—Paragon

projection screens, size

h. x

w.,

electrically operated 110-120v AC 60 Hz. 3-wire motor mounted inside
screen roller, 2.5 amp draw, instantly reversible, lifetime lubricated,
with internal thermal overload protector and mechanical brake. Motor
mounted with sound-absorbing fi xtures. Left hand motor location only.
Preset, accessible limit switches. J-box inside case accessible via 22
ga. steel cover plate. Entire roller and drive assembly easily removable
through bottom of case.
Roller to be 6" OD x

1

/

8

" wall steel tube. Roller brackets to be painted

white and to have double row radial ball bearings. Viewing surface to
be ([GREENGUARD for Children and Schools certifi ed Matt White]
[Glass Beaded]), fl ame and mildew resistant. Matt White and High
Contrast Grey viewing surfaces shall qualify as low emitting and
meet all of the requirements of the GREENGUARD for Children and
Schools and GREENGUARD certifi cation program, which are: emissions of total volatile
organic compounds < 0.22 mg/m

3

, formaldehyde < 0.0135 ppm, total aldehydes < 0.043

ppm, individual volatile organic compounds < 1/1000 TLV and < ½ chronic REL and
total phthalates < 0.01 mg/m

3

. Dowel shall be 1½" OD steel tube with black polyethylene

endcaps.
Case constructed of extruded aluminum. Bottom of case fully enclosed except for slot
allowing fabric passage. Bottom closure panel shall be extruded aluminum, fi nished white,
and may be removed manually for access to roller and drive unit. Closure panel shall be
held in place by screw and bracket at each end of case. Aluminum endplates with integrated
steel brackets for suspended mounting shall be fastened to extruded case with thread-
cutting screws. Eyebolts shall be provided for use in hoisting screen. Case support brackets
shall be welded steel channel, riveted to exterior of case.
Three-position control switch (or switches—specify number) shall stop or reverse screen at
any point. Controls to be furnished complete with cover plate.
Entire unit certifi ed by Underwriters' Laboratories, Inc. for the U.S. and Canada. Suitable
for use in environmental air space in accordance with Section 300-22 (c) of the National
Electrical Code, and Sections 2-128, 12-010 (3) and 12-100 of the Canadian Electrical
Code, Part 1, CSA C22.1. U.S. Patent No. 6,873,461.

Options:

Wall Mount Bracket Kit: Kit includes two structural steel brackets and hardware to attach
brackets to case. Hardware for mounting to wall structure by others.
Endcap Ceiling Tile Flange Kit: Extruded aluminum, fi nished white. Attaches to endcaps.
Each kit contains two (2) fl ange pieces and hardware for attaching trim fl anges to endcaps.
Ceiling Tile Flange for Front of Case: Each kit includes 12' extruded aluminum, fi nished
white. Attaches to front of case. Hardware for attachment to case included.
Downloadable 3-part specifi cations are available at www.draperinc.com.

®

Dimensions & Data

Size

Case

Net

Wt.

H x W

Length

(Lbs.)

Qty.

AV Format

15' x 20'

250"

440

20' x 20'

250"

450

11' x 22'

274"

484

16½' x 22'

274"

494

22' x 22'

274"

504

12' x 24'

298"

528

18' x 24'

298"

538

24' x 24'

298"

548

13' x 26'

322"

572

19½' x 26'

322"

582

14' x 28'

346"

616

21' x 28'

346"

626

Nominal

Image

Overall

Case

Net

Wt. Qty.

Diagonal

Area H x W

Size

Length

(lbs.)

4:3 NTSC Video Format

25'

177" x 236"

182" x 240"

250"

440

27½'

194" x 260"

199" x 264"

274"

484

30'

212" x 284"

217" x 288"

298"

528

32½'

230" x 308"

235" x 312"

322"

572

35'

248" x 332"

253" x 336"

346"

616

16:9 HDTV Video Format

270"

133" x 236"

138" x 240"

250"

440

300"

146" x 260"

151" x 264"

274"

484

324"

160" x 284"

165" x 288"

298"

528

354"

173" x 308"

178" x 312"

322"

572

384"

187" x 332"

192" x 336"

346"

616

Custom Size

Case Dimensions 13¼" high x 12" deep. Optional wall mounting brackets extend
1¾" beyond each end of case (hole centers are 1" from end of case).

Please see back page for dimensional diagrams of case and
optional wall mounting bracket

Part of the Draper
EcoVision™ range
of products

EcoVision

Paragons with cases longer than 300" require special handling.

(VICs are compatible only with the
Override Switch, and not with any
other wall switches or controls)

Advertising