Audiovox Stereo System User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TUNER BOX (TBX-1000) OPTIONAL

The tuner box is a very easy system to operate. To use the tuner box you must first use the LCD selector
station and dial to Video 1,2, or 3 whichever is the correct selection. You can operate the tuner either by

using the Tuner Control Station (Fig. 4), or by using the the supplied Unified Remote Control (Fig. 5).

Below is a description of the Tuner Control Station and Remote Control. Notice that many of the features

arc identical at either the Tuner Control Station or the Remote Control. The Video Cassette Player

/unctions on the bottom of the remote operate the Audiovox model AVP-6750. Note that the TVA^ideo
button. Mute. Vol. Up/Down, TV/CATV, and the Picture Selector do not fully perform their functions
with the LCD sjstem, but those TV functions do fully operate the AVT-975 (9" TV) and the AVT-1475

(13" TV) Audiovox televisions.

Refer to Figures 4 and 5 on next page to verify operation.

1. POWER BUTTON - Press this button to turn the tuner on. Press again to turn unit off.

2. AUTOPROGRAM BUTTON - When the AutoProgram button is depressed, all chaimels in TV mode

are searched and tuned, and the charmels with signals detected are automatically stored

3. CHANNEL UP/DOWN BUTTONS - Use these buttons to advance to next higher or next lower

channel.

4. ERASE/WRITE BUTTON - This button is used to manually add or erase any chaimel into the

memory. If the channel is stored, then simply push the Erase/Write button once to erase the chaimel.
If the particular channel is erased then push once to store.

5. SKIP/SEARCH BUTTON - This button selects between Skip and Search Mode. In "Skip mode" the

tuner only stops on channels that are programmed into memory when the Channel Up/Down buttons
are used When Skip mode is off the tuner will stop on all active channels.

6. DIRECT ACCESS BUTTONS - Use these buttons to make a direct channel selection. The chaimel

number chosen will be displayed on the screen for a few seconds. The direct access is carried out

with 0-9 keys (0-99ch).

7. TUNER PO"WER LIGHT - The light will be dimly lit when the timer is off, and light will be brighter

with power on.

8. REMOTE SENSOR - When using remote control, point the remote control at the remote sensor on

the tuner control station.

(4)

LCDl-6

Advertising