Avanti MO619M - Manual (Page 11)

> OPERATION PROCEDURE
• Plug the power supply cord into a standard 3-pronged 15 Amp, 120v AC 60 Hz
• After placing the food in a suitable container, open the oven door and put it on the
glass tray. The glass tray and roller guide must always be in place during cooking.
• Shut the door. Make sure that it is firmly closed.
To set a cooking program:
Place food in oven.
P O W E R
um
• Turn Power Select Control to correct required power level
• Select correct cooking time using Timer.
NOTE: as soon as Timer is turned, oven will start cooking food. When selecting time for less than 2
minutes, turn timer past 2 minutes and then return to correct timing.
ALWAYS RETURN TIMER BACK TO ZERO position if food is removed from oven before set cooking
time is complete and when oven is not In use.
TO STOP OVEN when a cooking program is set, push Door Release Button and open door ~
microwaves automatically stop entering oven cavity because of safety door lock system. If remaining
cooking time is not required, turn TIMER back to ZERO position before closing door.
CARE AND MAINTENANCE
Cleaning Your Appliance
Turn the oven off and remove the power plug from the wall socket before cleaning.
Keep the inside of the oven dean. When food splatters or spilled liquids adhere to oven walls,
wipe with a damp cloth. Mild detergent may be used if the oven gets very dirty. The use of harsh
detergent or abrasives is not recommended.
The outside oven surfaces should be cleaned with a damp cloth. To prevent damage to the
operating parts inside the oven, water should not be allowed to seep into the ventilation openings.
Do not allow the control panel to become wet. Clean with a soft, damp cloth. Do not use
detergents, abrasives or spray-on cleaners on the control Panel. When cleaning the control
Panel, leave oven door open to prevent oven from accidentally turning on.
If steam accumulates inside or around the outside of the oven door, wipe with a soft cloth. This
may occur when the microwave oven is operated under high humidity conditions and in no way
indicates malfunction of the unit.
It is occasionally necessary to remove the glass tray for cleaning. Wash the tray in warm sudsy
water or in a dishwasher.
The roller ring and oven cavity floor should be cleaned regularly to avoid excessive noise. Simply
wipe the bottom surface of the oven with mild detergent, water or window cleaner and dry. The
roller ring may be washed in mild sudsy water or dishwasher. Cooking vapors collect during
repeated use but in no way affect the bottom surface or roller ring wheels. When removing the
roller ring from cavity floor for cleaning, be sure to replace it in the proper position.__________________
• Remove odors from your oven by combining a cup of water with the juice and skin of one lemon
in a deep microwavable bowl. Microwave for 5 minutes. Wipe thoroughly and dry with a soft
cloth.
• When it becomes necessary to replace the oven light, please consult a dealer to have it replaced.
11
T.'_: V ."V