Safety decals, A warning, Caution – Allied Telesis 695 TSL User Manual
Page 10: Overhead hazard
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Safety Decals
These decals are located as shown on the Decal Location diagram and the Sub-Frame Assembly
diagram.
A WARNING
OVERHEAD HAZARD
STAY AWAY FROM UNDER LIFT
ARMS AND BUCKET
To prevent serious injury or death:
1. Do not stand or work under raised loader, unless supported.
2. Support bucket and lift arms before working under loader.
3. Lower loader to the ground before leaving seat.
A
CAUTION
1. Read Operator's Manual before operating.
2. Move and turn tractor at low speed.
3. Carry loader arms at a low position during transport.
4. Lower loader arms, stop engine and lock brakes before
leaving operator seat.
5. Do not stand or work under raised loader, unless properly
supported.
6. Add recommended wheel ballast or rear weight for stability.
7. Move wheels to widest recommended settings to increase
stability.
8. Do not handle large round bales or other shiftable objects
unless loader is equipped with a grapple fork.
9. Do not use loader to move or carry people.
10. Stay away from power lines. Electrocution can occur
without direct contact.
11. Review safety instructions annually.