Installation and adjustment - linear pull brakes – Apollo Radius User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
1. When assembling linear pull brakes, insert the brake body into the centre
spring hole in the frame mounting boss, and use the link fixing bolt to fasten
the brake body to the frame.
Installation and Adjustment - Linear Pull Brakes
2. Hold the shoe against the rim and swap the position of the 6mm and 3mm
B washer so that A is maintained at 39mm or more. (Refer to the following
diagram for clarification.)
3mm washer B
Shoe Fixing Link
6mm washer B
Shoe Fixing Nut
Washer B
Washer
45
Updated 23/05/07
RAOM0507 Apollo Bicycle Company Pty. Ltd. ABN: 60 001 914 469
Washer A
Advertising