Operating your wine/beverage cooler – Avanti WC492D User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATING YOUR WINE/BEVERAGE COOLER
> Setting the Temperature Control
• You can set the temperature as you desire by pushing the button or when you
push the two buttons for the first time, the LED readout will show the original tem
perature set at previous time (the temperature preset at the factory is 50°F )
• The temperature that you desire to set will increase 11F or iTi if you push theCj]
once, on the contrary the temperature will decrease 1°F or 1*0 if you push the
Idonee.
BEER;
FOR BEER OR SODA CANS
SPARKL: SPARKLING WINES/ROSE WINES
WHITE:
WHITE WINES/DRY
RED:
RED WINES
BBEH SPARKL WHITE
i------ WIRE -
NOTE: WHEN USING FOR BOTH WINE AND BEER SIMULTANEOUSLY WE REC-
OMMEND THAT YOU PLACE RED WINE BOTTLES ON TOP SHELF AND BEER ON
BOTTOM SHELF
> Reversing the Poor Swing of Your Appliance
This appliance has the capability of the door opening from either the left or right side.
The unit is delivered to you with the door opening from the left side. Should you desire
to reverse the opening direction, please call service for reversal instructions.
> Cleaning Your Wine/Beverage Cooler
• Turn the temperature control to “OFF”, unplug the Wine/Beverage Cooler, and re
move all items including shelves and trays.
• Wash the inside surfaces with a warm water and baking soda solution. The solution
should be about 2 tablespoons of baking soda to a quart of water.
• Wash the shelves and trays with a mild detergent solution.
• The outside of the Wine/Beverage Cooler should be cleaned with mild detergent and
warm water.
• Wring excess water out of the sponge or cloth when cleaning area of the controls, or
any electrical parts.
• Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and
wipe dry with a clean soft cloth.