2) mc-3 wall-mounting installation, Wiring diagram – Aiphone MC-3B User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(2) MC-3 WALL-MOUNTING INSTALLATION
FIVE PRONG CONNECTOR
WALL MOUNTING INSTALLATION
1) Remove a large screw located on front case of MC-3.
2) Gently lift top section of MC-3 case and turn it over.
3) Unplug the female section of the five prong positive connector
(i.e. large male plug), and separate top case from bottom case.
4) Attach bottom case to a single gang electrical box with screws.
5) Connect wires and gently replace top section of MC-3 case on to
bottom section.
6) Re-screw the large screw on bottom front case of MC-3 to secure.
3
WIRING DIAGRAM
NOTE: Be sure each block does not exceed ten MC-3/MC-3B stations. Up to three blocks (thirty MC-3/MC-3B stations)
may be installed per system.
Refer to the drawing below.
Ten IVIC-3/IVIC-3B stations
n q n n n n n
PS-24C
(or PS-24D)
BACKGROUND
MUSIC
SOURCE
AMP
p a g i n g
SPEAKER
- 3 -