Installation, Video monitor & power supply, Door release – Aiphone LEF MYW-P3L User Manual
Page 4: Mounting
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION
Video monitor & power supply
MYW-P3L
■
MYH-CU
or MYH-CUB
18V
B1
B2
I
£
A1
A2
B1
B2
U1
U2
A
U1
U2
U1
U2
ES3
- A1
B1
- A2
B2
U1
U2
-t-
B181
Q
@ 13^
A
Do not connect + to + wire between monitors powered by different power supplies.
I^gnn ; PS-18C or PS-18E
•
Impedance-matching switch: Set to OFF on all monitors, except on the last monitor.
•
Intercom wires must not be in the same jacketed cable.
Door release
MYW-P3L
EL-9S
Door release wires must
be in separate jacketed
cables from video wires.
Auxiliary lights
MYW-P3L
MOUNTING
1. Push button on the bottom, and lift front case off
of chassis.
2. Disconnect the MYW-P3L unit from chassis.
3. Mount the chassis to wall or single-gang box.
4. Pull in cables and make wire terminations.
5. Reconnect and mount the MYW-P3L to chassis and
lock.
l|
-
4
-