Care and maintenance, Taking dispenser out of service, Problems with your water dispenser – Avanti WD31 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

bracket and screws and may be ordered by completing the enclosed order form provided with your
instruction manual.

CARE AND MAINTENANCE

Wash the inside of the reservoir with a warm water and baking soda solution. The solution should

be about 2 tablespoons of baking soda to a quart of water.

The drip tray and water faucets should be cleaned with mild detergent and warm water.
At regular intervals or once a month inspect the coils located across the back of the dispenser.
Vacuum accumulation of dust or clean it with a hard brush.

TAKING DISPENSER OUT OF SERVICE

If the water dispenser will not be used for a long period of time, unplug the power cord from the

wall outlet.

Drain the water through the faucets.

Unit should not be transported on the sides. Place it upright if possible and cover if with a blanket.

PROBLEMS WITH YOUR WATER DISPENSER?

You can solve many common water dispenser problems easily, saving you the cost of a

possible service call. Try the suggestions outlined below to see if you can solve the problem
before calling the servicer.

I.

8

Advertising