Water collecting tray, Changing the light bulb, Vacation and moving care vacation – Avanti 863 YW User Manual
Page 6: Moving, Figure 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
WATER COLLECTING TRAY
As seen in the figure below, you may place the water-collecting tray in the back or in the front, it
is possible to keep colder air in the lower part of cabinet by placing it in the back. (Figure 4)
OPEN
{CeCdt< Qun Mem}
CLOSED
tCotMr AM
lepi
Can^lnttieirviv
Virtue cahfcttitQirjy
CoQfiif ckuiciOft
FIGURE 4
CHANGING THE LIGHT BULB
Before removing the light bulb, either unplug the refrigerator or disconnect the electricity leading
to the refrigerator at the main power supply. Failure to do so could result in electrical shock or
personal injury.
To change the refrigerator light:
1 -Remove the bulb cover in front of the themrastat box. Notice there is a screw holding this
cover.
2- Remove bulb.
3- Replace with a 15 watt appliance bulb.
4- Reconnect refrigerator to power supply.
Note:
Be sure to replace bulb with one of the same size and shape.
VACATION AND MOVING CARE
VACATION
Remove all the food if you are going for a month or more. Unplug the refrigerator and clean it.
Rinse well and dry. Keep doors open far enough for air to get in. This will keep odor and mold
from building up.
MOVING
Remove all food. Pack frozen in dry ice. Unplug the refrigerator and clean it thoroughly.
Take out at! removable parts. Wrap all parts and tape them together so they do not shift and
rattle. Screw in the leveling legs and tape the doors shut.
Be sure refrigerator stays in upright position during actual moving and in van. Protect outside of
refrigerator with blanket.
When you get to your new home, refer to page 3.