Editing the names, Editing phone number under stored name, Memory search – Audiovox MVX507 User Manual
Page 14: Memory dialing, Dialing after telephone number search, Dialing after name search, Speed dialing, Editing the telephone numbers editing the names
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing the Names
To edit the name of location No. XX (1-89), follow the next
steps.
1, Press (¿5^, and enter
CX^.
2. Press
3. Edit the name with the name entry keys.
4, Press @),
(
r
^ to store the new name.
Note: To exit the editing mode, press at any time.
Editing Phone Number under stored Name
To edit phone number under stored name, follow the next
steps.
1. Press
2. Enter the name with the name entry keys.
3. Enter <
23
)
for direct search.
4. Press C^)C^)tto set phone number edit mode.
5. Enter a new Phone Number.
6
. Press <™c) (
r
7|) dl) to store.
7. Press to clear the display.
Memory Search
When you wish to search the memory information:
1. Press (dE)- “Kecal 1” will be displayed.
2. Press or ® to scroll up/down memory information.
Note: Holding 0 or 0 automatically scrolls up/down
memory information.
RECALLING NUMBERS FROM
MEMORY
Memory Dialing
Telephone numbers can be recalled and dialed from one of
any 89 different memory locations.
1. Press (£
3
).
2. Enter the 1 or 2 digit location number (1-89).
The telephone number and name will be displayed.
3. Press
to initiate dialing.
Note: If nothing is stored in a particular memory loca
tion, “i l
0
i ior d Empty*’ will be displayed momen
tarily.. In this case, check the memory location with
Memory Search.
24
Example: To place a call using memory location No. 10
1. Press (
53
).
TiiiiiAB m
2. Enter
'Ll
$11
3. Press (si^.
Dialing after Telephone Number Search
You can scan, recall and dial numbers stored in memory lo
cations 1 through 89.
1. Press (¿
3
).
2. Press 0 or 0 to scroll up or down the memory locations.
3. If your desired telephone number is displayed, press
C
sewd
) to initiate dialing.
Note: To exit the search mode, press at any time.
Dialing after Name Search
You can dial after searching for telephone numbers by their
names.
1. Press
“
h
LPH
h
?” will flash.
2. Enter the beginning part of name with the digit keys.
Example: Enter J, JO, or JOH for JOHN,
3. Press (
r
^. “SedPch” will be displayed.
4. Press 0 or 0 to search for the desired name.
5. Press (JEN^ to initiate dialing.
Notes: • If no name is found, “Mot i ■ ound’’ will be dis
played momentarily in step 4. Enter another
character(s) to continue name search.
• To exit from the search mode, press at
any time.
Speed Dialing
You can place a call from the stored memory locations 1 to
9 using the keys to (
9
^.
1, Press one of keys to
2. Press CsE^ to initiate dialing.
25