Choice of burner {fig. 6), How to use the top burners – Avanti DG240 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

HOW TO USE THE TOP BURNERS

Figure 6

CHOICE OF BURNER

{fig. 6)

The symbols printed on the panel above the gas knobs indicate the correspondence

bet\ween the knob and the burner.

The most suitable burner is to be chosen according to the diameter and volume capac­

ity of the container to be warmed.
It is important that the diameter of the pots or pans suitably match the heating poten­
tial of the burners in order not to jeopardise the efficiency of the burners, bringing about
a waste of gas fuel.
A small diameter pot or pan placed on a large burner does not necessarily mean that
boiling conditions are reached quicker.

DIAMETERS OF PANS WHICH MAY BE USED ON THE TOP BURNERS

BURNER

MINIMUM

MAXIMUM

Auxiliary

4“ 23/32 (12 cm)

5" 1/2 (14 cm)

Semirapid

6“ 19/64 (16 cm)

9" 7/16 (24 cm)

Rapid

9" 7/16 (24 cm)

10" 15/64 (26 cm)

Do not use pans with concave or convex bases

Figure 7

Make sure that the handles of cookware

do not stick out over the edge of the

range, to avoid them being knocked
over by accident. This also makes It

more difficult for children to reach the

cooking vessels.

10

Advertising