Specifications, Lef-c, Bgr-10a – Aiphone LEF-10C User Manual

Page 4: Aiphone

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

(4) RADIO TUNING

(5) CLOCK

1. To program up to 6 pre-set frequencies/channels, press

MANUAL UP/DOWN button until the required
frequency is tuned in, press MEMORY button, then
press channel button (1 ~ 6).

2. Search the channel by pressing SEEK button, to either

UP or DOWN direction last used.

3. Press AM/FM button to changeover band (band

selection).

4. While in RADIO mode, press STN/CLK button to

show either TIME or FREQUENCY in non-priority
mode for 8 seconds and returns to display in priority
mode. To reverse display in priority mode, press
both MEMORY button and STN/CLK button at the
same time.

5. Set LOCAL/DX switch to LOCAL position in areas

of strong electric field.

1

.

2

.

To set HOUR, press UP/HR button, holding down
MEMORY/TIME button.
To set MINUTE, press DOWN/MIN button, holding
down MEMORY/TIME button.

*

General notes;

1. On BGR-IOA, each volume of background music, all call and chime call can he adjusted. Music volume can also be

adjusted on each LEF-C master & sub stations.

2. When a room station enters communication, background music is muted temporarily.
3. When BGR-IOA .system is powered off, the pre-set 6 channel memories and time are erased, after 10 to 30 minutes

back-up is consumed.

4. BGR-IOA is equipped with power amplifier and its .surface temperature can be a little higher than LEF-5C, -IOC.

SPECIFICATIONS

LEF-C;

* Power source:

DC 12V. Use PS-12C power supply, (in North America only).

* Current consumption:

Maximum 300mA per station.

* Power output:

Maximum 800mW at 20 ohm (reception).
Maximum 500mW at 20 ohm (transmission).

* Communication:

Push button station selection. Press-to-talk operation at calling master.
Occupied LED illuminates when the system is in use.

* Calling:

From master to master/sub; by voice or electronic mono tone.
From sub to master; by electronic mono tone and timed LED illumination for max. 20 seconds.

Sub's call-in can be signaled by tone even during master is communicating.

BGR-10A;

* Power source:

BGR-IOA; DC 24V. Use PS-24C power supply, (in North America only).

* Current consumption:

DC l.OA (max.), 0.25A (standby).

* No. of door station connectable:

Max. 3 door stations.

* No. of master station connectable:

Max. 11 room stations.

WARRANTY

Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of
one year after delivery to the ultimate user and will repair free of change or replace at no charge, should it become defective
upon which examination shall disclose to be defective and under warranty. Aiphone reserves unto itself the sole right to make
the final decision whether there is a defect in materials and/or workmanship; and whether or not the product is within the
warranty.

This warranty shall not apply to any Aiphone product which has been subject to misuse, neglect, accident, or to use in violation
of instructions furnished, nor extended to units which have been repaired or altered outside of the factory.
This warranty does not cover batteries or damage caused by batteries used in connection with the product.
This warranty covers bench repairs only, and any repairs must be made at the shop or place designated in writing by Aiphone.

Aiphone will not be responsible for any costs incurred involving on site service calls.

' i i i i i i Î

i i

Aiphone Co., Ltd. Nagoya, Japan
Aiphone Corporation, Bellevue, WA, USA

LEF-C-OM(E) 1091B

— 4 —

e

COMMUNICATION SYSTEMS

AIPHONE

HOME, BUSINESS, INDUSTRY

Printed in Japan (E)

Advertising
This manual is related to the following products: