Operation procedure – Avanti NOT FOUN MO649TW User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
> OPERATION PROCEDURE
•
Plug the power supply cord into a standard 3-pronged 15 Amp, 120v AC 60 Hz
• After placing the food in a suitable container, open the oven door and put it on the
glass tray. The glass tray and roller guide must always be in place during cooking,
•
Shut the door. Make sure that it is firmly closed.
1. The light is not on.
2. The oven door can be opened at any time during operation by pressing the door release button
on the control pane!. The oven will automatically shut off. To restart the oven, close the door and
then touch START \ STOP.
3. Each time a pad is touched, a BEEP will sound to acknowledge the touch. One of the function
pads must be touched before the number pads. Therefore, no beep will sound if the numeral pad
is touched before the function pad.
4. The oven automatically cooks on high power and defrosts on low power.
5. Time of day clock returns to the present time when the oven turns off.
6. When the RESET pad is touched during the oven operation, the oven stops cooking. If the oven
door is opened during the oven operation, all information is retained.
7. If the START \ STOP pad is touched and the oven does not operate, check the area between the
door and door seal for obstructions and make sure the door is closed securely. The oven will not
start cooking until the door is completely closed and the program has been set.
10