Insert gear sleeve into the transmission, Gear conversion – Audiovox Automobile Accessories User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Take caution in removing adaptor from Kit. Do not twist-off,
If the handle is fixed with a screw, use it to fix the adaptor
0
INSERT GEAR SLEEVE
INTO THE TRANSMISSION
KIT NO. 4
Geared sleeve to be inserted towards inside of vehicle
A)
Insertion from the red marked side.
B)
Insertion from the opposite side of the red mark.
Gear conversion
A) Wrong: too long.
B) Wrong: too short.
C) Right: length of geared sleeve and pivot are the same.
If a standard is not available for your car, gear H = 37 should be used after cutting it to
match regulator pivot.
Advertising