Avanti 309YBT User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
9. Remove the plastic cover and transfer it to the
uncovered hole on the opposite side.
10. Replace previously removed bolt-pin in step
8 to the left side.
11. Rehang the freezer door in the upper bolt -
pin.
i.
12. With the freezer door open, replace the mid
dle hinge at the left side.
13. Close the freezer door making sure the door
is leveled with the top of the cabinet. Tighten
screws holding middle hinge in place.
14. Replace the refrigerator door to the lower pin
of №e middle hinge and rehang the bottom of
the refrigerator door. Making sure all pins are
properly inserted, replace the bottom hinge
using the two screws and washer.
15. Make sure the door Is leveled.
16. Reptace leveling legs on the bottom of the
refrigerator.
/ Two persons recommended \
\
Toots required: 1 (+) screwdriver /