AEG 520B - Manual (Page 6)

First use
Operating
the control
knobs
Switching
on the
eiectronic
timer
Setting the
time of day
You should
also
be aware of the
following:
Pre-cieaning
the oven
My control knob (A) can be turned clockwise or anti-clockwise to
any position.
However, my oven temperature control knob (B) must be turned
clockwise to set and anti-clockwise to turn off.
As soon as I am connected to the mains supply (and also after a
power cut), the display in my electronic timer flashes 0.00
Only when you have set me to the correct time of day am I
ready to operate.
1 1 LI
< D D Ù
M_ . L. U
V ▼ T ▼
-F
6 I->I ->l fl 0
о о cp cp о
[61 1
A в C D E
- Press knob Eto release. (This does not apply to appliances
with an enamelled control panel).
- When finished with knob E press to retract. (This does not
apply to appliances with an enamelled control panel).
- Press buttons A and B 0 at the same time, hold them in po­
sition, and set the actual time of day by turning my knob E
M-
The time of day appears for you in display F.
- The red triangle above button D [fl] for automatic operation
flashes. It is cancelled by pressing button D.
Only now is my oven ready to operate.
Before using my ovens for the first time, clean all accessories with
warm water and washing-up liquid. Then switch my oven either to
the conventional or the hot air cooking method and select the
highest temperature and leave the oven on for at least one hour
with the oven door closed.
During this period there is an unavoidable odour which is not
harmful to your health.
We recommend that the room is well
ventilated for your convenience.
When my oven has cooled down, clean it with warm water and
washing-up liquid.