ASA Electronics VOM-73SNWIN - Manual (Page 7)

8. MIR/NOR OPTION
- When the switch is in MIR ( |f ) position, the picture will be reversed.
- When the switch is in NOR (|j ) position, the picture will be normally displayed.
- "CA2" & "CA3" are operated individually.
9. AUDIO JACK
- Connects audio connector to an (option) external speaker.
10. Right/Left/Back INPUT JACK
- "Right" used mainly for rear mounted camera or as specified by the installer.
- "Left" & "Back" used mainly for side or mirror mounted camera or as specified by the installer.
AFFIXING DISTANCE MARKERS TO THE MONITOR SCREEN
1. Clean monitor screen surface of fingerprints. Place distance indicators behind the vehicle at (3) feet, (6) feet and
(9) feet along the width of the vehicle.
These distances are measured from the rear bumper.(Refer to fig. 5)
2. Attach the markers to the monitor screen over the images of the distance indicators.
These markers represent distances of (3) feet, (6) feet and (9) feet from the back of the vehicle (See fig.5)
3. Affix the "STOP" marker on the monitor screen over the image of the rear bumper to locate the rear bumper.
4. The monitor screen is now "calibrated" for distances behind the vehicle of (3) feet, (6) feet and (9) feet.
VOM-73SNWIN OPERATIONS MANUAL
6 Voyager