NewAir AU-200E - Manual (Page 2)

STRUCTURE
Ultrasonic Humidifier
MODEL No. AU-200E
1. Mist outlet
2. Handle
3. Watertank
4. Water inlet Cover
5. Energ\ exchanger
6. Humidifying indicator
7. Power indicator
8. Tinier indicator
9. On/Off button
10. Timer button
OPERATION
1. Place the humidifier on a clean dry surface that is
lu\ cl and stable. The unit should not be in direct
sunlight.
2. Lift the watertank and unscrew the water intake
knob, pour in clean water. (See illustrations at right)
3. Replace the water tank intake knob, wipe away any
water on the outside of the lank. Pul the lank co\cr
back on the unit.
4. Plug the humidifier into the electrical outlet.
Push the power button, and the mist will begin coming from the mist outlet in
few minutes.
6. To set the timer. Press the timer button to choose working time from one hour
lo eight hours.
7. The humidifier can work up to 10 hours on a full tank of water.
8. This humidifier has a safely features which will turn the unit off if the water n
out or if the circuit is overheated.
9. As with any electrical appliance, close supervision of the humidifier is still re
while it is in use.