Scarlett SC-1221 - Manual (Page 5)

www.scarlett-europe.com SC-1221 5
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
· Please read these operating instructions carefully before connecting your thermo pot to the power supply, in order to
avoid damage due to incorrect use.
· Before first switching on check that the voltage indicated on the rating label corresponds the mains voltage in your
home.
· Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.
· For home use only. Do not use for industrial purposes.
· Always unplug the appliance from the power supply when not in use.
· Do not immerse the unit, cord or plug in water or other liquids. If it has happened, remove the plug from the wall
socket immediately and an expert should check the unit before using it again.
· Do not operate the appliance if the cord or the plug is damaged or, if the appliance has been otherwise damaged. In
such cases take the appliance to a qualified specialist for check up and/or repair if necessary.
· Ensure that the cord does not hang over sharp edges and keep it away from hot surfaces.
· To disconnect appliance from the power supply pull it out by the plug only, not by the cord.
· Place the appliance on a dry stable non-hot surface, away from hot objects (e.g. hotplates); do not place under
curtains and shelves.
· You should never leave the appliance not supervised during use.
· Keep the appliance away from children.
· The thermo pot is for heating water only, not for any other purposes and liquids.
BEFORE USING FOR THE FIRST TIME
· Remove all packing materials and sticker from the thermo pot.
· Fill the thermo pot with cool water up to the maximum level mark and boil it. Empty the thermo pot. Repeat this
operation. The appliance is ready for use.
INSTRUCTION FOR USE
FILLING
· Fill a thermo pot through a orifice in opened cover. Do not fill with less than 0.5 l of water to prevent the thermo pot
from operating dry and do not fill more than 3 l (up to FULL mark)
SWITCHING ON
· Place the thermo pot filled with water on a plane surface.
· Connect the plug to the power supply. The appliance will begin to operate and boiling indicator will light.
KEEP WARM FUNCTION
· When the water is boiled thermo pot will automatically switch to keep warm function. The boiling light indicator will go
off and keep warm indicator will light up.
NOTE: This appliance has a safety system, which automatically switches off heating element if the appliance
inadvertently has been switched on when empty, or if it operates dry.
RE-BOIL FUNCTION
· Keep warm function temperature is lower than boil temperature. In case of need thermo pot allows to boil warm
water quickly. For that press the Re-boil button.
3 WAYS OF WATER DISPENSE
· Press the mechanical water flood button.
· Press the automatic water flood button Pour Out on control panel.
· Press the water flood key.
REFILL
· To prevent the thermo pot from operating dry re fill water regularly, so its level in the appliance should not be lower
than mark "MIN"
SWITCHING OFF
· To switch off the appliance disconnect it from the power supply.
CARE AND CLEANING
· Always remove the plug from the socket and let the appliance cool down completely.
· Open a cover and pour out the water through the orifice.
· Clean the outside of the thermo pot with a soft damp cloth, then wipe with a dry cloth. Do not use any abrasive
materials.
· Remove scale regularly, using special descaling agents available at the market, following given instructions.
STORAGE
· Switch off and unplug the appliance; let it entirely cool down.
· Complete all requirements of Chapter CLEANING AND CARE.
· Keep the appliance in a dry cool place.
RUS
·
.
· , ,
, .