Durst Roll-to-Roll UV Inkjet-Printer Rho 160R - Manual (Page 2)

Durst Phototechnik
AG
Large Format Division
Vittorio-Veneto-Straße 59
I-39042 Brixen, Italy
Telefon +39/0472 81 01 11
Telefax +39/0472 83 09 80
www.durst-online.com
[email protected]
Durst Phototechnik
Digital Technology
GmbH
Julius-Durst-Straße 11
A-9900 Lienz, Austria
Telefon +43/4852/7 17 77
Telefax +43/4852/7 17 77 50
www.durst-online.com
[email protected]
The latest technical developments
are constantly being incorporated
into Durst products. Illustrations and
descriptions are therefore subject to
modification. All rights reserved on
images and illustrations.
© Durst Phototechnik AG, 05/2007
IX25005
Technical Data
Software/RIP:
Durst Rho 160R user software and RIP based
on LINUX with on-the-fly image processing
for very fast processing with minimum storage
capacity occupation on the hard disk.
Productivity
User selectable in 5 passes: pass 2 to pass 6
Rho 160R-8:
Up to approx. 26 m 2 /h (280 sq.ft./h) in 2 Pass
Mode at 400 dpi
Rho 160R-16:
Up to: 65 m 2 /h (700 sq.ft./h) in 2 Pass Mode at
400 dpi
Printing modes:
Colour, gloss/matte, black and white, “backlit”
Front-end workstation
Type:
LINUX Worstation
Operating system:
Pre-installed RedHat Enterprise Linux WS EM64T
Monitor:
HP TFT 19” Monitor L1955
Network Interface:
Ethernet 100/1000 Mbit
Printing specifications
Media types:
Wide range of all uncoated and coated 3M
media types and other media types with similar
characteristics.
Maximum printing width:
Up to 1575 mm (62 in.) with border and no edge
to edge option.
Max media weight:
Limited only by maximum outer diameter of
supply roll and/or max. weight.
• Lower position 1: approx. 35 cm up to
200 kg (445 lb. with pneumatic axle
(media feeding side) and with optional
accessory at the take up side Rho Axle
Pneu 76 74 to 82 mm (2.9 to 3.2 in.)
• Upper position:
approx. 25 cm (9.8 in.) up to 35 kg (77 lb.)
Max. medium thickness:
0.15 mm up to 2.5 mm
Medium cutoff:
Approx. 40 cm (16 in.) at the leading edge
Media cutting:
Mechanical guide for manual cutting of the roll
Location requirements:
Maximum height:
2,400 m (8,000 ft) above sea level
Temperature range:
+15 °C to +30 °C (+59°F to 86°F)
non-condensing
Relative air humidity:
25 - 80 %, non-condensing
General specifications
Power supply:
230/400 VAC ± 10 %, 3 phase + N/50 Hz
Power consumption:
Maximum: 13 KVA; average: 7 KVA
Max. amperage per phase:
208 VAC: 32 amp
230/400 VAC: 17 amp
Dimensions:
Width: approx. 505 cm (199 in.)
Length: approx. 201 cm (79 in.)
Height: approx. 212 cm (83 in.)
Space requirement:
Approx. 7 x 5 m ( 23 x 16 ft.)
Weight:
approx. 2000 kg (4400 lb)
Safety standards:
GS, CB, NRTL
Printing specifications
Printing system:
Patented Durst Roll to Roll transport system
with Quadro® Array-Technology
Resolution:
400/600 dpi (adressable)
800/1200 dpi (apparent)
Finish:
no finish necessary
Colours:
Rho 160R: CMYK
Inks:
3M UV 2700 Premium Ink,
vibrant UV-curing, pigmented inks for indoor
and outdoor applications Solvent free (low
VOC).
The Rho 160R can also be ordered with the
alternative Durst Rho Roll Ink.
Ink supply:
Continuous ink supply with 10-litre ink
reservoirs, refillable during operation for
large print processes. Refill ink in 5-litre
non-returnable containers, easy disposal in
collapsed condition, avoiding pollution to
the machine and the environment.