Ducati 848 - Manual (Page 29)

28
E
LAP Memory display
Displays the data saved with the LAP function: lap time,
MAX speed and MAX rpm.
To display the saved lap times, enter the menu and select
the “LAP MEM” page.
From this menu page, if you hold pressed switch (1, fig. 8)
in position B “
▼“ for 3 seconds, the data for the first lap will
appear. The display will show the lap number, lap time, MAX
speed and the MAX rpm reached for the lap in question.
If you press switch (1, fig. 8) in position B “
▼“, the display
scrolls through the 30 saved times, before returning to the
1
st
lap.
If you press switch (1, fig. 8) in position B “
▼“ for 3 seconds
while the saved times are displayed, the display immediately
resets all the saved times. In this case, if the LAP function
was active, it is switched off automatically.
The MAX speed saved is the maximum speed indicated on
the display in Lap function.
During saving, if the MAX speed shown exceeds 299 km/h
(186 mph), the speed reached is displayed (e.g. 316 km/h).
If there is no reading in the memory, the 30 times are shown,
with the lap timer showing “00.00.00”, MAX rpm = 0 and
MAX speed = 0.
During the lap, if the engine reaches one of the two
thresholds before the rev limiter or the rev limiter itself,
the respective warning lights (10, fig. 4) come on during
the display of the saved times.
press B
press B. . x 19
press B. . x 19
B= On 3 sec.
R e s e t o f a l l t i m e s i n m e m o r
press A
press A press B
press B
press A
press A
fig. 20