Wiring connections – Directed Video DV1600 User Manual
Page 21
Advertising
21
© 2002 Directed Electronics, Inc.
WIRING CONNECTIONS
1.
POWER CONNECTOR - The fused power wire
must be connected to a wire that has (+)
12 volts when the key is in the accessory
position. The ground wire must be con-
nected to a metal chassis point, preferably
scraped sheet metal.
2.
EXTERNAL REMOTE CONTROL CONNECTOR -
Insert the 1/8" pin plug for the External
Remote Sensor eye into this socket.
3.
VIDEO SIGNAL - Connector the YELLOW
Composite Video RCA cable to this jack.
4.
AUDIO SIGNAL - Connect the system L/R
stereo Audio RCA cables to these jacks.
Advertising