Dynex DX-40L150A11 - Manual

40" LCD HDTV
QUICK SETUP GUIDE
DX-40L150A11
Remote control
and
2 AAA batteries
Component
video cable
AC power
cord
TV stand and screws (4)
Quick Setup Guide
HDMI cable
(not included)
HDMI device Back of TV
L/R audio
cable
200 mm M6 screws
200 mm
Back of TV Cable box or satellite receiver
HDMI cable
Video or S-Video cable
Component cable
Wall jack
75-Ohm coaxial cable
AV cable
Back of TV
VCR
Audio cable
S-Video
cable
Back of TV
VCR
Audio cable
Digital sound system Back of TV
Digital optical cable
Back of TV
Audio amplifier
Audio cable
Computer
Back of TV
VGA cable Audio cable
Back of TV
Game console
Camcorder
Side of TV
AV cable
Audio cable
Component video device Back of TV
Component
video cable
Side buttons
Installing the stand
1 Remove the stand from the box and place it on a table or bench.
2 Lay the TV on a flat, cushioned surface.
3 Align the stand with the TV, as shown.
4 Secure the stand to the column with the four screws provided.
Installing a wall-mount bracket
1 Lay your TV face down on a table or bench. Make sure that you put down a
soft cushion or cloth so that your TV is not scratched.
2 Remove the four screws that secure the TV to the base, then remove the base.
3 Remove the four screws holding the stand bracket to the TV, then remove
the stand bracket.
4 Secure the wall-mount bracket
to the back of your TV using
the screws provided with the
wall-mount bracket.
Setting up your remote control
1 Press down on the battery compartment cover lock, then remove the
remote control cover.
2 Insert two AAA batteries into the battery compartment. Make sure that the
+ and – symbols on the batteries match the + and – symbols in the battery
compartment.
3 Replace the cover. Make sure that the lock snaps into place.
To program your existing remote control to work with your Dynex TV, see the
table below for common codes. If you have problems programming your
remote, or need a different remote control code, visit
www.dynexproducts.com for the latest remote control code information.
Connecting a DVD or Blu-ray DVD player, cable
box, satellite receiver, or game station
Using HDMI (best)
Using component (better)
Note: Cables are often color-coded to connectors. Connect yellow to
yellow, red to red, and white to white.
Using S-video (fair)
Using composite (fair)
Connecting an antenna
Connecting a home theater system
Using an analog audio cable:
Note: Cable connectors and jacks are often color-coded. Match the colors
when you connect the AV cable.
Using a digital audio cable:
Note: The DIGITAL OUTPUT jack only works with digital TV channels.
Connecting a computer
Philips
PHDVD5, PH5DSS,
PMDVR8, PDVR8
115
DirectTV
RC23
10463
RCA
RCU807
135
One for All
URC-6690
0464
Sony
RM-VL600
8043
Comcast
M1057
0463
Dish Network
VIP508, VIP622
720
Motorola
DRC800
0463
TIVO
Series 3, HD
0091
Universal remote control makers and models Set-top box makers and models
Universal remote control TV codes (for all Dynex TVs manufactured after Jan. 1, 2007)