Problem, Cause, Solution – AEG 2200 I W-D User Manual

Page 5: Dimensions, Electrical connection, Water pressure, Maximum recommended load for washing, Maximum recommended load for drying, Spin speed

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Servicing

Certain problems are due to lack of simple maintenance or oversights and can
be solved easily without having to call the AEG Service Department.

PROBLEM

THE MACHINE DOES

NOT START UP

{with pilot light off)

(with pilot light on)

CAUSE

The On-Off button is
not pressed

The door is not closed
properly

The appliance is not
plugged in

There is no electric
supply from the wall
socket

The programme selector
is not correctly
positioned

No water is entering the

machine

► SOLUTION

► Press the On-Off button

► Close the door

► Plug the appliance in

► Check the fuse

> Consult a qualified

electrician

► Turn the programme

selector to the required
programme

^ See solutions to the

problem: THE MACHINE
DOES NOT FILL

■ THE MACHINE DOES

• The water taps are not on

► Turn the taps on

NOT FILL

• The water supply has

► Wait until the water

been cut off

supply is restored

• The inlet hoses are bent

► Straighten the bend out

• The water pressure is

► If this occurs often.

too low

consult a qualified
plumber

• The water inlet filter is

► Clean the filter (see

clogged

page 35)

■ THE MACHINE

• The end of the drain

► Position the drain hose

EMPTIES AS IT FILLS

hose is too low

at the correct height
(between 60 and 90 cm)

• The end of the drain

► The end of the drain

hose is submerged in

hose must NOT be

water

submerged

• Drain pipe without

► Consult a qualified

vent-hole

plumber

40

Technical specifications

Dimensions

Width

Height
Depth

60 cm (23.6”)
82 cm (32.3”)
54 cm (21.3”)

Electrical connection

Voltage

220/240V - 50Hz

Maximum power
absorbed

2550 W (13A)

The washing programme "2" at 60°C and
the drying programme "cupboard dry" are
the references programmes for the Energy
label according to EEC Directive 92/75.

Consumptions to wash and dry a full
capacity wash load (4,5 kg cotton items) at
60°C, degree of drying required "cupboard
dry": 4.40 kWh, 134 litres.

Water pressure

Minimum (hot)
Minimum (cold)
Maximum

5 psi
7 psi

110 psi

Maximum recommended
load for washing

Cotton, linen
Synthetics,
delicate fabrics

Wool

4.5 kg (10 lb)

2 kg (4.5 lb)
1 kg (2.2 lb)

Maximum recommended
load for drying

Cotton, linen

2.25 kg (5 lb)

Synthetics

1.5 kg (3 lb)

Spin speed

Maximum

1200 r.p.m.

Advertising